• Get alerts when Windows CPU or Memory utilization continues high for xx seconds/ minutes - You can setup consecutive 1 or 2,3...50..200..xxx and usage yy% as threshold limit. Get alerts only when CPU / Memory usage has consecutive xx times higher than yy%
• No alerts for short high Spikes. No continue sending alerts when utilization remains high - Alert you only when the first time reach the defined consecutive times and alert you again when usage back to normal. Let you know when is abnormal and when is back to normal
• Allow to setup killable program name list - Program will be killed when CPU / Memory usage reach the threshold limit and the program has been setup in killable name list
• If you have a suspect program, it allows you to enable specific program monitoring and has an option to set it to be killed at a specific threshold limit.
• No alerts loss via 2 different mail servers - Mail alerts send out from our mail server and has option to send out from yours or Gmail/ Yahoo/ Hotmail SMTP server at the same time to let you get mail alert even if our site has problem.Check Gmail/ Yahoo/ Hotmail SMTP setup
• Allow to limit SMS sending a day - Cap # of SMS sending to avoid large SMS alerts when abnormal situation happened. if you set max. # is 10 then the 10th SMS will have 10/10 in the end. No SMS alert but you still can get mail alerts. Counter will be reset at 00:00 to let you get SMS alerts next day.
• Save those higher than threshold data to log file and separate the log files by date automatically.
• Allow not to send alert in some time slot - Sometimes it is normal to keep high usage while server is running batch jobs at midnight  
• I am alive notice - Setup to mail you the current monitoring log periodically to let you know monitoring program is running and watching your servers.
• Freeware for all Windows. SMS cost only. Register to get password and free SMS to try

• Below is the alert text example

• 09-08 22:01:21 Web Server CPU 98% exceed 95% for 100 sec.(10 times). *test.exe killed(True). TOP1 :  test.exe 87% @22:00:10 *test.exe(9),firefox.exe(1)

• Web Server : server name to tell you which server sending alert
• for 10 sec.(10 times) is the consecutive seconds and counts which the CPU is higher than the setting  
• *test.exe killed(True) : TURE means the program has been killed successfully. This is optional to setup to kill the TOP1 program automatically.
• TOP1 : test.exe 87% @22:00:10 is the TOP 1 program name and the time it happened
• *test.exe(9),firefox.exe(1) - test.exe has been on TOP1 for 9 times and it will be killed if you have enabled the automatic kill flag.